1、

1,

带体轻，重型PVG输送带比同级钢芯带要轻得多，消耗功率也低。这一优点对较长的传输系统来说非常重要。因而它可以允许选用较小的动力驱动，并且可以长期节省能源。

The belt is light and heavy PVG conveyor belt is much lighter than the same level steel cored belt, and the power consumption is low. This advantage is very important for a long transmission system. As a result, it can be allowed to use smaller power drives and can save energy for a long time.

2、

2,

重型PVG输送带具有较好的柔韧性，带体薄，输送机可选用较小直径的滚筒。

The heavy PVG conveyer belt has good flexibility, the belt is thin and the conveyor can choose the smaller diameter roller.

3、

3,

重型PVG输送带纬向强度高，(MT668-1997标准中不限制纬向强度)，纵向抗撕裂性能高。

The heavy-duty PVG conveyor belt has high weft strength and (MT668-1997 standard does not limit the zonal strength), and the longitudinal tearing resistance is high.

4、

4,

接头方式灵活快捷，即可采用带扣连接方式，又可采用胶接方式。接头强度高，一般可保持原带额定拉伸强度65－90％，更换、修复方便。

The joint mode is flexible and fast, and the connection mode with buckle can be adopted, and the glue connection can be used. The joint strength is high, and generally it can keep the rated tensile strength of the original belt 65 - 90%, and it is convenient to replace and repair.

5、

5,

重型PVG输送带覆盖胶耐磨性好、撕裂强度高，阻燃抗静电等安全性能优异，且覆盖胶厚度与形状可任意选择。

Heavy PVG belt covering adhesive has good wear resistance, high tear strength, excellent flame retardancy and antistatic property, and the thickness and shape of the cover can be selected arbitrarily.

6、

6,

重型PVG输送带一次性采购成本低于钢丝绳芯输送带，有利于资金周转。 品种结构 阻燃输送带由覆盖胶、带芯及边胶组成。其中，带芯由结构有全棉、难棉交织、尼龙、聚酯及尼龙和聚酯交织帆布，其胶层具有自熄、阻燃导静电性能。 阻燃输送带用途 本产品主要适用于煤矿的井下运输，也可用于冶金、化工行业的物料运输。整芯阻燃输送带可分为PVC型和PVG型。 PVC型上下覆盖层均为PVC盖胶，单面胶≥0.8mm，PVG型上下覆盖层均为丁腈橡胶和PVC并用，单面厚为1.5mm-4.5mm。PVC输送带运输倾角<16o,PVG型输送带运输倾角<20o，均可用于煤矿井上、井下运输

The one-time purchase cost of the heavy PVG conveyor belt is lower than the wire rope core conveyer belt, which is beneficial to the capital turnover. The flame-retardant conveyor belt of variety structure consists of cover adhesive, core and side glue. The core is made of cotton, hard cotton interlacing, nylon, polyester and nylon and polyester interwoven canvas, and its adhesive layer has self extinguishing, flame retardant and electrostatic conductivity. The use of this product is mainly suitable for coal mine transportation, and can also be used in the transportation of materials in metallurgical and chemical industries. The whole core Flame-retardant conveyer belt can be divided into PVC type and PVG type. PVC on the covering layer are PVC plastic cover, single-sided adhesive is larger than 0.8mm, PVG on the covering layer are nitrile rubber and PVC with single thickness 1.5mm-4.5mm. PVC conveyor belt conveyance angle <16o, PVG conveyor belt transport dip <20o, can be used in coal mine well, downhole transportation