输送带接头方式有皮带扣机械式接头、热硫化接头和冷硫化接头三种。随着社会发展，比较容易对输送带造成伤害的皮带扣接头已经淡出历史舞台，当下主要使用的接头方式主要是热硫化接头和冷硫化接头两种。
The conveyor belt joints are made of three kinds of belt buckle mechanical joints, hot vulcanized joints and cold vulcanized joints. With the development of society, belt buckle joints which are easy to cause damage to conveyor belts have faded out of the historical stage. At present, hot vulcanization joints and cold vulcanization joints are the main joints used.
不过在进行皮带接头的时候，到底是选择热硫化接头还是冷硫化接头，则要根据输送带的材质以及输送带的负荷要求而定。
However, the choice of hot vulcanization joint or cold vulcanization joint depends on the material of the conveyor belt and the load requirements of the conveyor belt.
普通输送带主要包括尼龙带、帆布带以及织物带等，输送带拉力比较低，在进行接头粘接的时候可以选择冷硫化胶水或者普通热硫化胶水进行粘接。
Common conveyor belt mainly includes nylon belt, canvas belt and fabric belt. The pull force of conveyor belt is relatively low. When bonding joints, cold vulcanizate or ordinary hot vulcanizate can be selected for bonding.