1. 重锤张紧皮带运输机运送带的打滑运用重锤张紧设备在皮带打滑时可增加配重来处理，增加到皮带不打滑停止。但不该增加过多，避免使皮带接受不必要的过大张力而下降皮带的运用寿命。
1. When the belt slips, the counterweight can be added to deal with it until the belt does not slip. However, it is not allowed to increase too much, so as to prevent the belt from accepting unnecessary excessive tension and reducing the service life of the belt.
2. 螺旋张紧或液压张紧运送带机的打滑 运用螺旋张紧或液压张紧的皮带运输机呈现打滑时可调整张紧行程来增大张紧力。可是，有时张紧行程已不行，运送带呈现了永久性变形，这时可将皮带截去一段从头进行硫化。
2. When the belt conveyor with screw tension or hydraulic tension shows slip, the tension stroke can be adjusted to increase the tension. However, sometimes the tension stroke is no longer good, and the conveyor belt presents permanent deformation. At this time, the belt can be cut off for vulcanization from the beginning.